BBQGaskets.com
BBQSmokerMods.com
BBQSmokerSupply.com
StoveGaskets.com
UDSparts.com
IslandOutdoorLLC.comOklahoma Joe HIGHLAND Horizontal Baffle Plate (Heat Deflector Tuning) by LavaLock®
FITS ALL HIGHLAND MODELS
Laser cut and computer designed with air flow rate calculations.
- These plates will result in PERFECT side to side balanced cook chamber temps.
- Easy installation with just a couple of bolts.
- Allows for precise temperature control, perfect cooks and reduced fuel consumption.
- Enhanced look; Now with laser cut LavaLock logo on the baffle plate!
An excellent mod! Get them while they are hot
NOTE: This baffle plate also fits Kingsford 36" Ranch smoker
Pro tip/installation note:
There is no need to bolt the two large plates together. We leave them separated for easy cleaning or removal.
Always use a full load of charcoal for the best results!
| Installation Notes | Plate straps are optional. The Triangle Ears are directional, please ensure that the baffle lays flat after installation. If not, reverse the ears to ensure that the tuning plate fits flush to the cook chamber side wall. Season before use. |
|---|
-
Brad asks
I generally smoke around 275 degrees. I read that the baffle plates are engineered for 250. Will they still work as intended at the higher temperature?
3 people already voted for this question.
-
<p>Yes. To increase temp, simply open your intake more and if needed you can slide one half of the baffle over to overlap the other a little. that will allow it to draft more and raise temp. thanks! </p>
-
-
Jack asks
What is the thickness of the baffle plate, and how much does it weigh?
1 people already voted for this question.
-
This baffle plate is approx. 19 lbs. & 1/8" thick.
1 people found this answer helpful.
-
-
Luis asks
What difference is the heavy duty vs stainless steel baffle? Is one thicker than the other or “resistant” in some way the other isn’t? I don’t description in difference other than stainless and not sure what “stainless” implied. Thank you in advance
1 people already voted for this question.
-
One plate is made from mild steel and the other is made from stainless steel. That is the only difference.
-
-
Talbot asks
Given the current COVID situation are you able to ship to Canada?
1 people already voted for this question.
-
Yes, we are able to ship to Canada.
1 people found this answer helpful.
-
-
James Daigneault asks
Will these plates and water pan work in the OK Joe Highlander Reverse Flow as a replacement for stock plates?
1 people already voted for this question.
-
<p>please look at our Highland reverse flow mods page ( you are looking at the regular standard highland page)</p>
<p><span>https://bbqsmokermods.com/oem-smoker-mods-by-brand/oklahoma-joe-s/highland-reverse-flow.html</span></p>
-
-
Joe asks
what is the width and length of the plates? will they fit other smokers?
1 people already voted for this question.
-
<p>they can fit other smokers. please look at our plate sizes here</p>
<p><span>https://bbqsmokermods.com/smoker-parts/baffle-plates-heat-deflector-tuning.html</span></p>
-
-
Timothy Behrle asks
Do these baffles have to be seasoned at a high temp like you do with a new grill or can I start smoking as soon as assembled?
1 people already voted for this question.
-
<p>Yes, it is recommended to season the baffle plate before use. Season at temp for one hour. You can do that at the start of your cook.</p>
-
-
Michael Romano asks
Can this be used with the stack lowering kit?
1 people already voted for this question.
-
<p>During testing we noticed using the baffle plate along with the lowering kit restricted air flow too much. Just use the baffle plate by itself. Thanks</p>
-
-
Jonathan Vail asks
I have the old version of the smoker the brinkman trail master pro. Will this fit?
-
Please follow the Installation Notes that are on the link below. Once you get the measurement of your smoker, you will have a better idea of the size baffle you will need. Thanks for your interest.
https://bbqsmokermods.com/smoker-parts/baffle-plates-heat-deflector-tuning/lavalockr-37-x-14-5-baffle-plate-horizontal-bbq-smoker-tuning-system.html1 people found this answer helpful.
-
-
Eric Mengel asks
What size bolts do I need to connect the two plates together? My order did not come with them and I thought they would of been included!
-
Pro tip/installation note:
There is no need to bolt the two large plates together. We leave them separated for easy cleaning or removal.
Always use a full load of charcoal for the best results! More information can be found on the link below. Videos are also helpful. Thanks
https://bbqsmokermods.com/oem-smoker-mods-by-brand/oklahoma-joe-s/highland/oklahoma-joe-highland-horizontal-baffle-plate-heat-deflector-tuning-by-lavalockr.html1 people found this answer helpful.
-
| Installation Notes | Plate straps are optional. The Triangle Ears are directional, please ensure that the baffle lays flat after installation. If not, reverse the ears to ensure that the tuning plate fits flush to the cook chamber side wall. Season before use. |
|---|
-
This Item:
Oklahoma Joe HIGHLAND Horizontal Baffle Plate (Heat Deflector Tuning) by LavaLock®
As low as $89.00 Regular Price $99.00
-
LavaLock® Fire Box Charcoal Wood Basket, 12 x 12 x 6 LASER CUT
Special Price $65.00 Regular Price $69.99
-
BigCook™ Expansion Rack System for OK Joe Highland by Total Control® BBQ
Special Price $175.00 Regular Price $188.00
-
LavaLock® Fire Box Charcoal Wood Basket, 12 x 10 x 6 LASER CUT
Special Price $77.49 Regular Price $79.99
-
LavaLock® Minion Method Charcoal Basket w/ 2 Minion Bars 12 x 10 x 6
$97.00
-
Total price
CALLING ALL VIDEO REVIEWERS
We’d love to post your video review to our websites, YouTube Channel, and social media outlets. As a thank you, for the videos that we use, we will be giving our reviewers coupons, or FREE ITEMS. You’ll also get a ‘shout out’ and shares on our Social media. Click here to learn more.