BBQGaskets.com
BBQSmokerMods.com
BBQSmokerSupply.com
StoveGaskets.com
UDSparts.com
IslandOutdoorLLC.comOklahoma Joe LONGHORN Horizontal Baffle Plate (Heat Deflector Tuning Plate) by LavaLock®
FITS LONGHORN, NOT HIGHLAND
Laser cut and computer designed with air flow rate calculations.
These plates will result in PERFECT side to side balanced cook chamber temps.
Easy installation with just a couple of bolts.
Allows for precise temperature control, perfect cooks and reduced fuel consumption.
An excellent mod! Get them while they are hot.
NOTE: This baffle plate is also for River Grill Ranchers & Kingsford Pro Rancher whos cook chambers measure 41 x 19.
| Installation Notes | There is no need to strap the two baffle plates together for normal use. Leaving them separate allows for easier cleaning or removal of the tuning plates. The straps allow for securing the plates during transport. The Triangle Ears are directional. |
|---|
-
Jacob Francis asks
Will this fit a reverse flow long horn if I convert it to a non reverse flow offset smoker?
1 people already voted for this question.
-
This plate has holes for a non reverse flow Longhorn. If you are looking to convert your reverse flow Longhorn to a non reverse flow it would help. You would also need to relocate the stack. If you are looking to upgrade your reverse flow longhorn with a new solid plate here is the link for that.
https://bbqsmokermods.com/oem-smoker-mods-by-brand/oklahoma-joe-s/longhorn/lavalockr-reverase-flow-baffle-heat-plate-for-longhorn-reverse-flow.html1 people found this answer helpful.
-
-
Bill Bellamy asks
Is it ok to not bolt it in and just let it lay in the chamber? I am concerned about cleaning the drippings under the baffle plate..
1 people already voted for this question.
-
Pro tip/installation note:
There is no need to bolt the two large plates together. We leave them separated for easy cleaning or removal.
Always use a full load of charcoal for the best results! More information can be found on the link below. Videos are also helpful. Thanks
https://bbqsmokermods.com/oem-smoker-mods-by-brand/oklahoma-joe-s/highland/oklahoma-joe-highland-horizontal-baffle-plate-heat-deflector-tuning-by-lavalockr.html1 people found this answer helpful.
-
-
Matthew asks
What are the dimensions of this unit, I have an older Oklahoma Joe offset smoker
1 people already voted for this question.
-
they are approx.17.5" x 36"
they make a huge difference in balancing the heat in the cook chamber! No more burnt food by the firebox opening!
have a great day.1 people found this answer helpful.
-
The measurements are approx. 17.5 x 36". You can find more info on the link below. Thank you
https://bbqsmokermods.com/oklahoma-joe-longhorn-horizontal-baffle-plate-heat-deflector-tuning-plate-by-lavalockr.html1 people found this answer helpful.
-
-
Eric Smithers asks
Will this work with the Reverse flow Longhorn? What I am trying to accomplish is getting the heat away from the nearside Smoke chamber. The side closest to the firebox always runs about 50 degrees warmer than the farside.
1 people already voted for this question.
-
<p>Hi. While our baffle does balance temp, the standard LavaLock® baffle plate was not designed to fit the Longhorn Reverse Flow. We do not know if it will fit. We are working to find out. Thank you </p>
-
-
MARTIN WALTERS asks
Will this work with the Reverse flow Longhorn? I know this question has been asked in the past, just curious if there is an update?
-
This plate has holes for a non reverse flow Longhorn. If you are looking to convert your reverse flow Longhorn to a non reverse flow it would help. You would also need to relocate the stack. If you are looking to upgrade your reverse flow longhorn with a new solid plate here is the link for that.
https://bbqsmokermods.com/oem-smoker-mods-by-brand/oklahoma-joe-s/longhorn/lavalockr-reverase-flow-baffle-heat-plate-for-longhorn-reverse-flow.html1 people found this answer helpful.
-
-
Philip Salazar asks
Will this plate fit a old country Brazos?
-
This will work for your smoker. https://bbqsmokermods.com/oem-smoker-mods-by-brand/old-country_194/lavalockr-old-country-brazos-baffle-plate-horizontal-bbq-smoker-tuning-system.html
1 people found this answer helpful.
-
-
Brian Karney asks
Does the plate cover the entire smoke chamber. In the picture it looks like it a little short on the left side?
-
<p>No it does not need to . If it covered the whole chamber it would not draft properly .</p>
-
-
Eric Smithers asks
Have you made one for the reverse flow Longhorn yet?
-
<p>At this time we do not have baffle plates available for the reverse flow Longhorn. We are in development of one though. Please check back in the coming weeks for updates to the site.</p>
-
-
Eric Smithers asks
Does this work with the reverse flow longhorn?
-
<p>Hi, </p>
<p>This baffle is not designed for the reverse flow. We do not think it will fit. </p>
-
| Installation Notes | There is no need to strap the two baffle plates together for normal use. Leaving them separate allows for easier cleaning or removal of the tuning plates. The straps allow for securing the plates during transport. The Triangle Ears are directional. |
|---|
-
This Item:
Oklahoma Joe LONGHORN Horizontal Baffle Plate (Heat Deflector Tuning Plate) by LavaLock®
Special Price $94.00 Regular Price $104.95
-
BIGCOOK™ EXPANSION RACK SYSTEM FOR OK JOE LONGHORN BY TOTAL CONTROL® BBQ
Special Price $179.99 Regular Price $199.99
-
LavaLock® Smoke Stack Lowering Kit for Oklahoma Joe's Highland
Special Price $26.95 Regular Price $29.99
-
Stainless Steel Water Pan - Fits ALL Baffle Plates by LavaLock®
$49.95
-
PRO PACK Firebox Gasket 1/8 x 5/8 x 7' w/ RTV adhesive by FireBlack®
Special Price $16.75 Regular Price $18.99
-
Total price
CALLING ALL VIDEO REVIEWERS
We’d love to post your video review to our websites, YouTube Channel, and social media outlets. As a thank you, for the videos that we use, we will be giving our reviewers coupons, or FREE ITEMS. You’ll also get a ‘shout out’ and shares on our Social media. Click here to learn more.