LavaLock® Baffle Plate For Old Country Pecos (Heat Deflector Tuning)

NOTE: This baffle is slightly longer than needed. It is a 2 piece design and MUST be overlapped in the center to fit the cook chamber. See more in "technical info"

These plates will result in great side to side balanced cook chamber temps.

Allows for precise temperature control, perfect cooks and reduced fuel consumption.

An excellent mod! Get them while they are hot.

There is a small cross bar near the fire box. This baffle needs to slide under the cross bar. Due to design changes on the Brazos smoker, some Brazos smokers have mounting posts for the cross bar. In this situation, the plate MUST be modified to get past the cross bar mount posts. If you have this on your Brazos, you will need to cut/modify the baffle plate to get past those bars. Once you modify this plate, it is non-returnable. If you are unable to cut metal, then please verify which you have before ordering. (please see pics).

(Image may vary slightly from actual product. Design revisions may be made as necessary).

Technical Specs

This plate was NOT designed specifically for this exact model. It is one of our universal plates and fits well with the Pecos Model. It is a 2 piece plate and you MUST overlap the left plate onto the right plate to shorten it. (You can also cut and shorten it) Non-returnable once used/modified. Plate size is 37 x 14.5"

Installation Notes

Some Pecos smokers come with a small (short) existing baffle. This part will fit on the existing baffle. In this case the included TRIANGLE pieces may not be needed, so they won't need to be installed on the plate. You can also remove the existing baffle to allow for better fitment of our baffle plate system. Non-returnable after use or modification.

On some older models that have a existing small baffle, there is no need to remove the existing baffle. This heat deflector plate sits on the existing small baffle.

There is a small cross bar near the fire box. This baffle needs to slide under the cross bar. Due to manufacturer design changes, some Brazos smokers have mounting posts for the cross bar. In this situation, the plate MUST be modified to get past the cross bar mount posts. If you have this on your Brazos, you will need to cut/modify the baffle plate to get past those bars. Once you modify this plate, it is non-returnable. If you are unable to cut metal, then please verify which you have before ordering. (please see pics).

Do not use the included side triangle ears, they are not needed.